Plastic extruder PET plastic steel belt production line PET strapping equipment for PLC control system
PRODUCT DESCRIPTION
Features :
1. Good tensile strength----PET strapping tape production line has the tensile strength of steel tape, good ductility, good impact resistance, not easy to break, and ensures the safety of product transportation.
2. Small elongation----Although PET strapping tape is a kind of plastic, its elongation changes very little, and its elongation is only 1/6 of polypropylene. It can maintain tension and make the expansion and contraction amount no longer change after packaging.
3. Strong temperature resistance----Experiments have proved that the melting point of PET strapping tape is about 260℃, and it can be used for a long time at 120℃ without deformation, and has good stability.
4. Good economic benefits----The density of PET strapping tape is 1.30~1.38g/cm3, which is only 1/6 of the density of steel tape (7.8g/cm3), equivalent to the length of 6-ton steel tape, and the price per unit length is relatively low.
PRODUCT DESCRIPTION
| Model | PET-2 | PET-3 | PET-4 | PET-6 | PET-8 |
| Raw materials | Bottle flakes/crushed materials |
| Number of tapes | 2 | 3 | 4 | 6 | 8 |
| Width (mm) | 9-32 |
| Thickness (mm) | 0.4-1.2 |
| Maximum line speed(m/min) | ≧150 | ≧150 | ≧150 | ≧150 | ≧150 |
| Screw Model | 90 | 100 | 125 | 150 | 180 |
| Reducer model | 200 | 250 | 280 | 315 | 350 |
| Dehumidifier | 1000 | 1000 | 2000 | 3000 | 3500 |
| Metering Pumps | 100CC |
| Production capacity /24 H | 5-6T | 7-8T | 10-12T | 12-15T | 18-20T |
Features
1. After nitriding, the surface hardness of the embossing wheel can reach 60 degrees after heat treatment, which is strong and durable. The surface of the packing tape pressed by this embossing machine has clear lines and sufficient roughness.
2. The upper and lower flower wheels of the embossing machine are equipped with synchronous gears to ensure the synchronous rotation of the upper and lower sides, ensure that the patterns on both sides of the packing belt are completely matched, and increase the beauty and transparency of the packing belt.
3. There is a fixed gap when the upper and lower flower wheels are assembled and will never collide, prolonging the service life of the embossing wheel
TECHNICAL SPECIFICATION ABOUT PET STRAP MAKING MACHINE
- For the PET strap packing into a roll. The center automatically arranged winding. Consists of: closing reel, core, transmission unit, winding displacement unit, rack, electrical control parts, etc.
- Automatic computer control winding disk diameter and length of the winding.
- Winding parameters, cable parameters can be set according to the product specifications by computer.
- Servo motors are used to control the width and spacing of winding displacement.
- Straps entrance with protection device.
- Torque arm directly separately checks the location and pneumatic plug to maintain the tension of straps.
FQA:
Q: What is the voltage of the PET plastic steel belt equipment?
A: 380V/50HZ, three-phase (customization supported)
Q: What is the extrusion capacity of the PET plastic steel belt equipment?
A: Different models have different extrusion capacities, with capacities ranging from 150-600KG/H
Q: What is the producible width of the PET plastic steel belt equipment?
A: 9-32mm
Q: Can the PET plastic steel belt equipment be customized?
A: Customization supported
Q: Where does the PET plastic steel belt equipment come from?
A: China.
Q: What are the certifications for the PET plastic steel belt equipment?
A: ISO CEO certification.
Q: What is the minimum order quantity for the PET plastic steel belt equipment?
A: 1 set
Q: What is the weight of the PET plastic steel belt equipment?
20T, 40GP container * 3PCS
Product Tags:
|
|
Plastic extruder PET plastic steel belt production line PET strapping equipment for PLC control system Images
|
